pub struct ThroughputLimits {
pub global_rps: Option<u32>,
pub burst: u32,
pub usecase_pct: Option<u8>,
pub scope_pct: Option<u8>,
pub rules: Vec<ThroughputRule>,
}Fields§
§global_rps: Option<u32>The overall maximum number of requests per second per service instance.
Defaults to None, meaning no global rate limit is enforced.
burst: u32The maximum burst for each rate limit.
Defaults to 0, meaning no bursting is allowed. If set to a value greater than 0,
short spikes above the rate limit are allowed up to the burst size.
usecase_pct: Option<u8>The maximum percentage of the global rate limit that can be used by any usecase.
Value from 0 to 100. Defaults to None, meaning no per-usecase limit is enforced.
scope_pct: Option<u8>The maximum percentage of the global rate limit that can be used by any scope.
This treats each full scope separately and applies across all use cases:
- Two requests with exact same scopes count against the same limit regardless of use case.
- Two requests that share the same top scope but differ in inner scopes count separately.
Value from 0 to 100. Defaults to None, meaning no per-scope limit is enforced.
rules: Vec<ThroughputRule>Overrides for specific usecases and scopes.
Trait Implementations§
Source§impl Clone for ThroughputLimits
impl Clone for ThroughputLimits
Source§fn clone(&self) -> ThroughputLimits
fn clone(&self) -> ThroughputLimits
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for ThroughputLimits
impl Debug for ThroughputLimits
Source§impl Default for ThroughputLimits
impl Default for ThroughputLimits
Source§fn default() -> ThroughputLimits
fn default() -> ThroughputLimits
Source§impl<'de> Deserialize<'de> for ThroughputLimits
impl<'de> Deserialize<'de> for ThroughputLimits
Source§fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
Source§impl PartialEq for ThroughputLimits
impl PartialEq for ThroughputLimits
Source§impl Serialize for ThroughputLimits
impl Serialize for ThroughputLimits
impl StructuralPartialEq for ThroughputLimits
Auto Trait Implementations§
impl Freeze for ThroughputLimits
impl RefUnwindSafe for ThroughputLimits
impl Send for ThroughputLimits
impl Sync for ThroughputLimits
impl Unpin for ThroughputLimits
impl UnwindSafe for ThroughputLimits
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
T in a tonic::Request§impl<L> LayerExt<L> for L
impl<L> LayerExt<L> for L
§fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>where
L: Layer<S>,
fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>where
L: Layer<S>,
Layered].§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute] value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi [Quirk] value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);